Yanmar SV60

The Yanmar SV60 has a width of only 1.99m and a tight working envelope. It benefits from a very short rear overhang and a front turning radius of just 2.24m.

With a long arm, the Yanmar SV60 can achieve a cutting height of 5.9m, a digging depth of 3.95m (blade up) or 4.2m (blade down) and a forward reach of 6.41m. The SV60 can carry one ton loads and more by increasing the counterweight.

The Yanmar SV60 uses four hydraulic pumps, two variable displacement pumps and two gear pumps with a total hydraulic flow capacity of 139.4 litres per minute. Power and control are optimised by proportional flow control of the hydraulic lines. Digging force from the long arm is 27.3 kN and 41.9 kN in the bucket.

The Yanmar SV60 is built around a turbocharged direct-injection four-cylinder TNV diesel engine with 44.8 HP (33.4 kW) and complies with Stage V standards thanks to EGR cooled exhaust gas recirculation and highly efficient engine timing.

ECU optimisation also improves the fuel consumption, as does auto-deceleration which drops the engine into idle if the control levers are unused for four seconds. There is also an eco-mode to drop the rpm further and conserve even more fuel.

The SV60 provides ample leg room, air-suspension seating, easy access, ergonomic controls and several useful storage spaces. All-round visibility is excellent and supplemented by three mirrors and a rear-view camera. All the main controls are located on the joysticks for maximum productivity and minimum operator fatigue.

Yanmar use only top-quality components throughout, guaranteeing low maintenance requirements and a long service life.